Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 28, 2012 10:56:36 GMT -4
That is going to be so cool. Thanks!  |
|
|
|
Post by ACDP5859 on Nov 11, 2012 17:47:23 GMT -4
OK IRA, You got me hooked. when are going to be able to work on this one. I can't wait to see what's going to look like.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 14, 2012 13:00:05 GMT -4
OK IRA, You got me hooked. when are going to be able to work on this one. I can't wait to see what's going to look like. Just Finished MuD BuG and I'm painting the Rocket Van today... maybe by this weekend... |
|
|
|
Post by ACDP5859 on Dec 2, 2012 16:20:18 GMT -4
OK IRA, THE BUG AND THE ROCKET VAN ARE DONE. IT'S TIME. YOU GOTTA WORK ON THIS. YOUR KILLING ME. I CAN WAIT TO SEE THIS DONE.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 5, 2012 11:13:03 GMT -4
OK IRA, THE BUG AND THE ROCKET VAN ARE DONE. IT'S TIME. YOU GOTTA WORK ON THIS. YOUR KILLING ME. I CAN WAIT TO SEE THIS DONE. [glow=red,2,300]Thanks![/glow] I should have some new photos posted today... |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 5, 2012 11:24:28 GMT -4
[glow=red,2,300]WE'VE GOT PRIMER!!![/glow] I got most of the Body work done on the LSR Team. Here is the Racer!  Rear View....  Here is the Transport Vehical!  Team Photo...  |
|
|
|
Post by KRAZY RICK on Dec 5, 2012 14:46:03 GMT -4
How long till completion Ira ?
|
|
|
|
Post by ACDP5859 on Dec 5, 2012 20:25:57 GMT -4
How long till completion Ira ? TILL IT'S DONE!! ;D ;D ;D |
|
|
|
Post by ACDP5859 on Dec 6, 2012 13:24:07 GMT -4
IRA, Are you going to be putting engines in these?  Or are you keeping that a surprise.  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 7, 2012 11:44:36 GMT -4
How long till completion Ira ? [glow=red,2,300]GOOD QUESTION RICK!!![/glow] I've found that finishing a model is the hardest part. It might be a couple weeks or more depending on how it goes... |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 8, 2012 19:18:01 GMT -4
[glow=red,2,300]VETTE ATTEMP'S UNDERBODY...[/glow] I first filled the 2 areas near the front wheel wells with sheet plastic. Then I cut out a piece of sheet plastic for the Underbody and carved on it untill it fit Nice & Tight.  I decided to cut off the raked end of the Underbody ans attach it directly to the back of the body.  I cut 3 little Tabs from strip plastic and glued them in place to hold the Underbody in Flat for gluing.  Here is what the Underbody looks like in position...  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 10, 2012 12:21:58 GMT -4
[glow=red,2,300]TRANSPORTER...THE UNDERSIDE!!![/glow] I am using the Vette Indy Chassis up front and Sheet Plastic for the rear Underbody. I cut the front off the Vette Indy Chassis and molded it into the front end. Then I added a piece of sheet plastic to the front end to attach the Chassis too.  |
|
|
|
Post by KRAZY RICK on Dec 10, 2012 13:07:23 GMT -4
I honestly don't know how you come up with these Ira ...... great bit of imagination & engineering !!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 11, 2012 2:53:26 GMT -4
man l am really digging this great work
and killer hauler and race car
just love it
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 11, 2012 11:52:02 GMT -4
IRA, Are you going to be putting engines in these? Or are you keeping that a surprise. No engines in the cars, but I might make a Vette Powered Dragster Chassis to display with the Racer or on the Transporter... |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 11, 2012 16:20:53 GMT -4
[glow=red,2,300]UNDERBODIES!!![/glow] I measured the Rear Area and cut out sheet plastic to fit. The Vette Indy Chassis is a little short so I will have to fill in the back of the Front Area a little bit. I cut the back of the Indy Chassis off Flat.  I cut a piece of plastic to fill the Front Area and glued it in place. I also added 2 strips of plastic under this piece so I can glue the Chassis to them.  Then I cut out a piece of plastic to fit under the front of the Rear Underbody. I glued it in place here as shown....  More Coming... |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 12, 2012 11:58:53 GMT -4
[glow=red,2,300]TRANSPORTER UNDERBODIES...[/glow] I positioned the Rear Underbody and marked inside the body to show the Underbodies height. Then I glued square strips of plastic on the in sides and a piece of rectangular plastic in the rear.  Here are both Underbodies in place!  |
|
|
|
Post by KRAZY RICK on Dec 12, 2012 12:11:52 GMT -4
Fits like a glove !!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 14, 2012 11:54:38 GMT -4
I honestly don't know how you come up with these Ira ...... great bit of imagination & engineering !!! [glow=red,2,300]THANKS RICK!!![/glow] |
|
|
|
Post by ACDP5859 on Dec 14, 2012 16:59:01 GMT -4
LITTLE OLD KIT MAKER IRA. ;D UNBELIEVABLE. YOU MAKE IT LOOK FACTORY.  I'M NOT YELLING. I STILL CAN'T FIND MY GLASSES, SO THE TYPE IS IN CAPS.  |
|
Or are you keeping that a surprise. 
I'M NOT YELLING. I STILL CAN'T FIND MY GLASSES, SO THE TYPE IS IN CAPS. 