Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 24, 2012 10:14:07 GMT -4
love to see em cut apart and gluded back together !! cant wait !! Thanks! Yeah, this is my favorite part of the build...  |
|
|
|
Post by KRAZY RICK on Sept 24, 2012 18:35:15 GMT -4
Go Ira Go !!!! ;D   |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 25, 2012 11:00:41 GMT -4
[glow=red,2,300]FULL INTERIOR!!![/glow] With a little bit of fitting, I got the front bulkhead mounted in the body, instead of the floorboard. Looks like I have enough room to put in a full interior and a Deals Wheels Driver with a Complete Body, not just the head and a hand!  Notice the interior has been filled with putty and sanded smooth. |
|
|
|
Post by KRAZY RICK on Sept 25, 2012 16:20:53 GMT -4
Great work !!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 26, 2012 10:53:18 GMT -4
[glow=red,2,300]NEW FIREWALL!!![/glow] The stock VW Firewall doesn't fit anymore so I made a new Firewall from sheet plastic. I also covered the transmission hole in the body, with a strip of plastic, to form the new 911 Transmission Mount.  Here is the 911 Engine in place!  I added a piece of Triangular Shaped Strip Plastic to the bottom edge of the Rear Spoiler to finish it off...  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 27, 2012 9:43:42 GMT -4
[glow=red,2,300]BiG TIRES!!![/glow] Here are the finished Wheels & Tires, nice & shiny before we hit the MUD! The Wheels are from the Monogram Porsche 911 and the Inner Wheels are from the Revell Indy Vette...  |
|
|
|
Post by KRAZY RICK on Sept 27, 2012 12:46:16 GMT -4
Wild Ira, I could see this with a vinyl top & woodgrain sides !!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 27, 2012 13:10:11 GMT -4
Thanks Rick! |
|
|
|
Post by JOE66 on Sept 28, 2012 8:48:17 GMT -4
This thing is crazy !!  Looking forward to seeing it done. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 28, 2012 10:54:45 GMT -4
Wild Ira, I could see this with a vinyl top & woodgrain sides !! Now , That would be WILD!!! |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 30, 2012 13:37:06 GMT -4
[glow=red,2,300]PORSCHE 911 INTERIOR!!![/glow] I found most of the Interior Parts in the 911 kit. The Seats, Console, Shifter and hand brake are from the 911. The driver figure is from the parts box and the head is from a Deals Wheels Kit...  I decided to use one Seat and it was a little too high. I ground off the base and it sets at the right height now.  Nice Seats! Too bad, I might have to cut off the head rest the clear the drivers BiG Head!  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 30, 2012 14:53:59 GMT -4
[glow=red,2,300]FITTIN' IT ALL IN...[/glow] I cut the drivers legs and removed a little plastic, so I could bend them into better positions. The right leg is forward for the gas and the left will be back a bit.  Here is the basic set up for the Interior.  I like the little 911 Console, it looks like it was made for the car.  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 30, 2012 15:34:50 GMT -4
[glow=red,2,300]WILL HE FIT?[/glow] Most of the body work is done and the body is primed. The basic chassis is set up and the interior is mocked-up. Let's see if his BiG head fits in the car...  YEP!!! He fits in there just right!  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 3, 2012 17:09:04 GMT -4
This thing is crazy !! Looking forward to seeing it done. Thanks Joe! |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 7, 2012 15:08:58 GMT -4
IRA GET HELP! Your a sick Dude, ;D But finish both of these be for taking the meds They look great so far. Thanks Dave! |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 7, 2012 15:22:28 GMT -4
[glow=red,2,300]COOL WILLY IS BACK!!![/glow] I made a figure just like this one for my "Willy's Deal" model. I needed to add a little width to the body, so I cut pieces of plastic and glued them on the sides as shown.  I added putty and sanded the shoulders smooth. The arms were then glued in position.  I cut the shoes from another figure and glued them in place. I also carved the Seat and Driver to fit as far back as possible.  Working on fitting Cool Willy's Head now...  |
|
|
|
Post by BADSEED on Oct 7, 2012 22:39:30 GMT -4
im reaLLY ENJOYING watching this !!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 11, 2012 13:20:18 GMT -4
Just PLAIN OLD COOL! Tom Daniels would be proud of you... NICE WORK so far.
Keep us posted as you progress.
8-)RICK
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 14, 2012 10:48:17 GMT -4
im reaLLY ENJOYING watching this !!! Thanks! The hard drive on my main computer blew out last week, so I won't be able to post photos untill later next week. WOW! I sure have a lot of time for model building since the computer went down, a lot of progess photos coming... |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 22, 2012 11:17:00 GMT -4
[glow=red,2,300]WE GOT WHEELS!!![/glow] I cut plastic tubing for the axles. Both axles were glued to the bottom of the chassis.  Here are the BiG Wheels & Tires mounted in the axles...  Rear View...  |
|
